Soundlite ceiling tiles are manufactured from non combustible inorganic Glasswool, bonded with an inert thermosetting resin binder. A decorative vinyl facing is available in CoraI, which provides a durable finish.
Install (25/40)mm thick “Soundlite” acoustic suspended ceiling tiles in (Coral) vinyl facing complete with T sections, hangers, hold down clips etc. Installation strictly in accordance with manufacturer’s detail & specification.
Soundlite panels are designed to fit standard grid systems. Hold down clips are provided to secure ceiling tiles in the grid system. A sharp knife/blade to be used for trimming/sizing of panels.
1. Soundlite acoustical ceiling tiles are laid in a suspended ceiling grid system and, where instructed by the architect, secured by means of hold down clips as supplied by Isover. 2. The contractor is to take care when installing the tiles to ensure that the facings are kept free from dust and grime, finger-marks or any other possible blemish or damage. 3. No damaged tiles are to be installed and extreme care is to be taken when further work is carried out on the ceiling (e.g. installation of the light fittings). 4. Any light fitting, fan or any other fixture is to be independently secured by whatever means required and should not rest on the ceiling tile so as not to put any pressure on the tile whatsoever. 5. The ceiling grid is to be laid out as per the manufacturer’s instructions.
Store product undercover, and in dry conditions. Store flat. Handle with care, especially on the edges and corners, which can be damaged if subject to sharp or heavy impact. Do not apply excessive pressure, for example by standing or sitting on the product, as permanent damage may be caused.