BANNER

CAVITYBATT/ CAVITYLITE

Cavitybatt and Cavitylite have been specially developed for insulation within steel frame structures, timber frame buildings and dry wall systems. Cavitybatt and Cavitylite is manufactured using high quality glass wool and is glass tissue faced on one side for ease of handling and improved rigidity.

  • Steel frame buildings
  • Timber frame structures
  • Dry wall systems
  • Designed for use in cavity walls but may effectively be used on top of ceilings, along the roofline, or within masonry wall cavities.
  • Cavity fill
  • Lifelong energy savings
  • Exceptional acoustic properties
  • Lightweight and easy to handle
  • Maintenance free
  • Long product life - will not readily age
  • Self supporting - will not sag
  • Compression packed - to reduce volume and optimise transport and storage
  • Non-combustible - tested to SANS 10177 Part 5
  • Class A1, s1, do according to EN 13823
  • EUROCLASS A1 - EN 13501-1

Contributes to indoor comfort and lifelong energy savings by reducing heat loss/gain due to the inherent thermal insulation properties.
A dry wall system correctly designed and insulated will offer the same or better thermal properties than a conventional brick and mortar construction.

Offers exceptional acoustic properties and enhances indoor environmental quality by absorption of noise. Cavitybatt/Cavitylite reduces sound transmission to and from a room or building.
A dry wall system correctly designed and insulated will offer the same or better acoustical properties than a conventional brick and mortar construction.

Self Support

  • Self supporting - will not sag

 

Fire Properties

  • Non-combustible -tested to SANS 10177 Part 5 - Class A1, S1, D0 according to En 13823
  • EUROCLASS A1 - EN 13501-1

 

Savings

  • Lifelong energy savings.

 

Easy Use

  • Lightweight and easy to handle.

 

Acoustic Properties

  • Offers exceptional acoustic properties and enhances indoor environmental quality by absorption of noise.

 

Durability

  • Odourless, inert and fully compatible with all standard building materials and components
  • Will not promote corrosion of steel, copper or aluminium.
  • Will not sustain vermin
  • Will not breed or promote fungi, mould or bacteria
  • Non-hygroscopic

Batts are designed around the frame/stud system for ease of installation, therefore minimal tools are required. A sharp knife/blade will come in handy for off cuts and for slitting batts to fit over piping and conduits.

  • Open packaging allowing space for the initial immediate recovery of compressed product
  • Push individual batts firmly into the cavity space with glass tissue facing on the exposed side
  • Use a sharp knife to slit the Cavitybatt to encapsulate piping/conduits
  • Use a sharp knife to cut batt around any plug points
  • Make sure that there are no gaps, which will cause thermal and noise leakage

Install (51/63/100/102) mm thick self-supporting non-combustible lightweight, glass tissue faced Glasswool “Cavitybatt insulation”, offering a thermal resistance value of (1.34/1.66/2.63/2.68) m² K/W for heat and/or acoustic control. Install strictly in accordance to manufacturer’s detail and specification.

CodeTypeDimmensionsPack DetailsR-value
Length(m)Width(m)Thick(mm)Qty p/packArea m²Volume (m³)Sales Unitm² .K/W
Dry Wall Structure - Batts
14597Cavitybatt 51mm1.20.6514028.80.480Pack1.34
14598Cavitybatt 63mm1.20.6633021.60.480Pack1.66
14599Cavitybatt 102mm1.20.61022014.40.480Pack2.68
21353Cavitybatt 51mm6.01.2 (slit 2x600mm)5117.20.131Roll*1.34
21354Cavitybatt 63mm5.41.2 (slit 2x600mm)6316.50.146Roll*1.66
21355Cavitybatt 102mm5.41.2 (slit 2x600mm)10216.50.236Roll*2.68

Footer

As a “One-stop Insulation shop” Insulpro CC can offer insulation solutions across all temperature ranges and applications.

CONTACT US

Tel: 011 835 2128 / 29 / 30
Email: mail@insulpro.co.za
Address: 52 5th Street, Booysens Reserve, Johannesburg, 2091
Website: www.insulpro.co.za

EMAIL US

Submission JHB