PIPE INSULATION

WALL INSULATION

ROOF INSULATION

FLOOR INSULATION

NON DRIP CORK TAPE

NON DRIP CORK TAPE

Non drip tape is a black butyl tape impregnated with small particles of cork which can be wrapped around cold pipes to prevent condensation.

 

Technical Data

PT4200.

Black.

Mainly synthetic rubber, asphalt and cork granules.

Operating Temperature °C: -20 to 90
Application Temperature °C: -20 to 90
Packing: 1 roll per box
Odour: None to slight
Effects on Copper: None
Specific Gravity: 1.10
Minimum width mm: 20
Length m: 1,1
Elongation %: 100

 

All  the above represents average values of tests taken from time to time. We request that users satisfy themselves that the products are suitable for their particular application.

 

Thermoglass Webbing Tape

 

 

Technical Data

Construction Plain Weave
Product Number 708-10-xxx-0301
Coil Length 30m per coil
Thickness 3mm
Available Widths 25mm/40mm/50mm/65mm/75mm/100mm
Operating Temperature up to 500°C depending on application
Finish Loomstate
General A superb insulating tape to be used for oven seals, pipe lagging, ducting gaskets, hose and cable protection, sealing over bolts and Hawaiian dividing curtains.

 

 

Thermo-Ceramic Webbing Tape Glass Reinforced

 

Technical Data

Product number 7 08-71-050-0201
General Tolerances on fabric materials are ± 5%
Width: 50mm, 75mm
Weight: 1000g/m² nominal
Thickness: 2mm nominal
Yarn Type: Alumino silicate- viscose blend
Yarn Reinforcement: Fibreglass strands
Length of Roll: 30m
Operating Temperature: 600°C continuous (depending on the application and even higher for temperature excursions).
Finish: Loomstate
Melting Point: 1700°C

 

VIDO TAPE

Highly flexible closed cell elastomeric foam (FEF) suitable for hot and cold thermal insulation, featuring a combination of low thermal conductivity, high water vapour diffusion resistance and low flame spread.

 

 

Technical Data

Pipes, ducts, tanks, refrigeration, air conditioning, heating, plumbing, pipe fittings and water ducts.

Industrial applications for energy saving and/or condensation prevention purposes.

Thickness: 3 mm.
Lenght: 10 m.
Width: 50mm.

Maximum service temperature +85°C
Minimum service temperature -40°C
Water vapour diffusion resistance (EN 12086) μ ≥ 3 000
Water absorption (EN 13472) <0.1 %
Leachable chlorides (EN 13468) <500 ppm When tested in line with DIN1988/7,leachable chlorides <0.05%
Ph (EN 13468) Neutral (7±1)
Reaction to fire (EN13501) Euroclass E
Dimensional tolerances as per EN14304

 

Medium temperature [°C] -30 -20 -10 0 10 20 30 40 50 70
Thermal conductivity [W/(m °K)] EN 13787 – EN12667 0.035 0.036 0.037 0.038 0.039 0.040 0.041 0.042 0.043 0.044

 

These products should be tested before use, to ensure suitability for intended application.

 


These products should be tested before use, to ensure suitability for intended application.

Footer

As a “One-stop Insulation shop” Insulpro CC can offer insulation solutions across all temperature ranges and applications.

CONTACT US

Tel: 0118352127
Email: mail@insulpro.co.za
Address: 52 5th Street, Booysens Reserve, Johannesburg, 2091
Website: www.insulpro.co.za

EMAIL US

Submission JHB