PIPE INSULATION

WALL INSULATION

ROOF INSULATION

FLOOR INSULATION

PLASTER

HARDSETTING PLASTER 300°C NON-ASBESTOS

 

The product is suitable for application to thermal insulation of various types and sets without the application of heat. TPH plaster produces a robust surface layer resistant weather, impact and abrasion damage. If necessary it can be painted.

 

Technical Data

Mix with clean water and can be applied direct onto steam pipes, valves and bends with temperatures up to 300°C / 1000°C. Insulpro CC Hardsetting Plaster can be applied over other plasters or fibre insulations, (blanket or modules) providing it has been covered and secured with wire mesh or expanded metal in the case of flat overhangs. Best results are obtained by applying two coats of 5-8mm thick, allowing the first coat to dry before the second coat is applied.

 

HARDSETTING PLASTER 1000°C NON-ASBESTOS

 

The product is suitable for application to thermal insulation of various types and sets without the application of heat. TPH plaster produces a robust surface layer resistant weather, impact and abrasion damage. If necessary it can be painted.

Technical Data


Composition: A specially developed mixture of inorganic mineral fibres, cement and chemically inert fillers. When mixed
with water, this composition forms a general-purpose protective coating with self-setting properties.
Thermal Conductivity:
  • 100°C – 0.068 W/mK
  • 250°C – 0.079 W/mk
  • 600°C – 0.091 W/mK
Mixing Water Content: 10-15 litres/25kg
Limiting Temperature: 0°C ot 110°C
Density After Application: 900kg/m³
Shelf Life: Indefinite under dry conditions
Covering Capacity 6m² = 6mm thick
Elasticity: 3%

Footer

As a “One-stop Insulation shop” Insulpro CC can offer insulation solutions across all temperature ranges and applications.

CONTACT US

Tel: 0118352127
Email: mail@insulpro.co.za
Address: 52 5th Street, Booysens Reserve, Johannesburg, 2091
Website: www.insulpro.co.za

EMAIL US

Submission JHB